Best Solar Panel in India 2026:
The Complete Buyer’s Guide
Updated April 2026 By Loom Solar · 12 min read
If you are searching for the best solar panel in India, 2026 is genuinely the smartest year to make the switch. Your electricity bill hit ₹6,000 last month. This month it is ₹7,200. With electricity tariffs rising every year across India, there is no sign of relief — unless you take control of your own energy. Loom Solar, India’s leading direct-to-consumer solar manufacturer, makes that switch affordable, transparent, and backed by real engineering support.
India added a record 45 GW of solar capacity in FY 2025-26, crossing a historic 150 GW total milestone — a 50-fold increase from just 2.82 GW in 2014 (SolarQuarter, 2026). Panel prices are at all-time lows. The government subsidy under the PM Surya Ghar Muft Bijli Yojana is live and funded with ₹75,021 crore. And solar on EMI now costs about the same as your monthly electricity bill.
This guide gives you an honest, data-backed look at every Loom Solar panel available in India right now — complete specifications, real-world performance numbers, and pricing — so you can pick the best solar panel in India for your roof and stop overpaying for electricity.
Key Takeaways
- India added 45 GW of solar in FY 2025-26 — pushing panel prices to all-time lows and subsidies to all-time highs (SolarQuarter, 2026).
- The PM Surya Ghar Yojana offers up to ₹78,000 in government subsidy for eligible homeowners — no cost to apply.
- A 5 kW solar system cuts your electricity bill by 70–90%, saving ₹4,800–₹6,000 every month
- The SHARK-650WP Back Contact (LBC) delivers 24.20% cell efficiency — Loom Solar’s highest-efficiency panel with the best temperature coefficient in the lineup (−0.24%/°C).
- Loom Solar offers 5 SHARK panel variants from 550 Wp to 730 Wp — covering every application from 2 BHK homes to large commercial solar farms.
- Solar on EMI starts from ₹4,500/month — roughly equal to what you are already paying your electricity board.
In This Guide
Why 2026 Is the Right Year to Go Solar in India
India’s solar market grew 43% in 2025, with 36.6 GW installed in a single calendar year — the largest annual addition in Indian history (Mercom India, 2026). That scale has driven three changes that make 2026 the easiest time to buy the best solar panel in India for your home.
Panel prices are lower than ever. Monocrystalline solar panels now start at ₹40–₹55 per watt. High-efficiency N-Type TOPCon bifacial panels from Loom Solar start as low as ₹18–₹21 per watt through direct manufacturer purchase. Five years ago, those numbers did not exist.
Government funding is fully available. The PM Surya Ghar Muft Bijli Yojana has ₹75,021 crore allocated for 1 crore homes. As of March 2026, 26.21 lakh households have already claimed subsidies totalling ₹17,967 crore disbursed (PIB, Ministry of New and Renewable Energy, 2026). The remaining funds are waiting for eligible buyers.
Payback is faster than ever. A 5 kW on-grid solar system in India now pays for itself in 3.8 years — then generates near-free electricity for another 20+ years after that (Spectra Solar Power, 2025).
India is also now the 3rd largest solar market globally and projected to become the 2nd largest in 2026 (SaurEnergy/NSEFI, 2026). That means more service technicians, better warranty support, and a mature supply chain — wherever you live in India.
The question is not whether to switch to solar. It is which panel to choose. Let us answer that.
See the Latest Solar Panel Price List 2026 →
Types of Solar Panels in India: Which Technology Suits You?
Over 80% of new solar panel installations in India in 2025 used monocrystalline-based technology (Maysun Solar, 2025). Polycrystalline panels — which dominated the market five years ago — are rapidly becoming obsolete. Here is what each technology means for your home or business in plain terms.
Polycrystalline Solar Panels
Efficiency: 13–16%. The cheapest option on paper, but they need significantly more roof space to produce the same output. For most urban Indian homes with limited terrace area, polycrystalline panels are a poor fit. They are largely being phased out of serious residential use.
Monocrystalline PERC Solar Panels
Efficiency: 20–22%. The mid-range standard for residential solar installations. Good performance, widely available, reasonable price. Loom Solar’s Shark 400W and Shark 440W panels use this proven technology, delivering reliable output at an accessible price point.
N-Type TOPCon Solar Panels
Efficiency: 22–24.5%. The current high-performance standard. N-type TOPCon cells perform better in high temperatures and low-light conditions — both critical advantages for the Indian climate. They also degrade more slowly over time. The Loom Solar Shark 600W and Shark 550W panels are built on this technology.
Bifacial Solar Panels
Extra output: 10–25% from the rear side. Bifacial solar panels capture reflected sunlight from the roof, walls, or ground behind them — generating more electricity from the same physical footprint. Loom Solar’s Shark 545W Bifacial and Shark 600W TOPCon Bifacial both leverage dual-side generation for maximum yield per square metre.
HJT (Heterojunction) Solar Panels
Efficiency: up to 25%. The most efficient commercially available technology in 2026. Currently priced at a premium, but dropping year on year. Best for rooftops where every square metre must work as hard as possible.
Loom Back Contact (LBC) Solar Panels
Efficiency: up to 24.20%. The next evolution in premium aesthetics and efficiency. LBC technology eliminates all front-side metal busbars, moving the electrical connections to the rear. This maximises the surface area exposed to sunlight while delivering a sleek, uninterrupted black appearance on the rooftop. The flagship SHARK-650WP Loom Back Contact Solar Panel is currently the highest-efficiency module in Loom Solar’s residential range, designed for those who want maximum power generation with an ultra-premium aesthetic.
👉 Swipe left to see full table
Source: Maysun Solar, Loom Solar product data, 2025–26. Prices are indicative and vary by supplier and quantity.
Solar Panel Module Efficiency by Technology — 2026
Higher efficiency = more power from the same roof space. Data source: Loom Solar SHARK product specifications.
The 5 Best Solar Panels in India for 2026 — Full Comparison
Loom Solar manufactures five distinct solar panel models, each engineered for a specific use case — from premium residential rooftops to large commercial farms and ground-mounted solar plants. Every panel listed below is BIS-certified, available for direct manufacturer purchase, and backed by Loom Solar’s in-house engineering and after-sales support team. Here is a detailed look at each, with the real specifications and performance data that matter.
1. SHARK-650WP Loom Back Contact Solar Panel
The SHARK-LBC 650 Wp is Loom Solar’s flagship premium rooftop panel, built on LBC (Loom Back Contact) technology — where all electrical connections move to the rear of the cell, eliminating front-side metal busbars entirely. This design maximises sunlight absorption across the full cell surface and gives the panel a clean, premium rooftop appearance. At 24.20% cell efficiency and 650 Wp output, it delivers more energy per square metre than any other panel in the Loom Solar range — making it the definitive choice for modern premium rooftops.
650 Wp
Peak Power
24.20%
Cell Efficiency
−0.24%
Temp Coeff /°C
30 yrs
Performance Warranty
- Back Contact Design: No front busbars — clean premium look + full cell surface exposed to sunlight for maximum light absorption
- Electrical: Vmp 46.92 V / Imp 13.87 A | Voc 53.28 V | Isc 14.92 A | 144 cells | Power tolerance: 0–+5W
- Temperature Performance: −0.24%/°C — best temp coefficient in the lineup; produces measurably more output during Indian summers above 45°C compared to standard TOPCon or HJT panels
- Anti-PID & Anti-LeTID: Dual degradation protection — reduces long-term power loss from both potential-induced and light/elevated-temperature-induced degradation
- Structural ratings: 5,400 Pa snow load | 2,400 Pa wind load | 35 mm ice-ball impact tested | Minimised micro-crack sensitivity
- Dimensions & Weight: 2383 × 1134 × 35 mm | 32.3 kg | Anodised aluminium frame
- Certifications: IEC 61215, IEC 61730, CE, BIS, ISO
- Warranty: 15-year product warranty + 30-year performance warranty (1% first-year degradation, 0.3%/year thereafter)
Why it ranks #1: The −0.24%/°C temperature coefficient is the lowest in Loom Solar’s entire range — at 45°C rooftop temperature, the SHARK 650 LBC retains significantly more output than any standard panel. The absence of front busbars also eliminates the most common source of micro-crack-related failures. For homeowners who want maximum energy from minimum roof space and a rooftop that looks premium, this is the definitive choice.
2. SHARK 730–750 Wp HJT Dual-Glass Solar Panel
The SHARK 730–750 Wp HJT Dual-Glass is Loom Solar’s highest-wattage panel, built on Heterojunction Technology (HJT) — a premium N-type cell architecture combining crystalline silicon and amorphous thin-film layers for peak efficiency in both high-heat and low-light conditions. At 730 Wp peak output and 23.50% module efficiency with bifacial rear capture of up to 20%, this panel is engineered for solar farms, ground-mounted installations, and large commercial and industrial projects where fewer modules per megawatt directly lowers racking, wiring, and land costs.
730 Wp
Peak Power
23.50%
Module Efficiency
+20%
Bifacial Rear Gain
30 yrs
Performance Warranty
- HJT N-Type Bifacial: 24 busbars | 132 cells (6×22) | Front efficiency 23.50% + up to 10% rear-side gain from ground or surface reflection
- Electrical: Vmp 43.00 V / Imp 16.98 A | Voc 51.00 V | Isc 17.80 A | Power tolerance: 0–+5W
- Dual Glass: 2.0 mm high-transmission coated front + 2.0 mm semi-tempered back — extends module lifespan beyond single-glass equivalents
- IP68 Junction Box: 3 bypass diodes | 4.0 mm MC4 connector | Anodised aluminium alloy frame
- Height advantage: Mounted at 1.5 m above ground, bifacial output increases by 7–20% — ideal for elevated ground-mount and agri-solar setups
- Structural ratings: 5,400 Pa snow load | 2,400 Pa wind load | Dimensions: 2384 × 1303 × 33 mm | 38.3 kg
- Degradation: 1% year 1, <0.30% annually thereafter — retains 91%+ rated output at year 25
- Warranty: 15-year product warranty + 30-year performance warranty
Real-world advantage: In a 100 kW ground-mounted installation, using the SHARK 730 HJT instead of a 550 Wp panel requires 37 fewer modules — reducing civil, structural, and wiring costs by roughly 15–20% on a per-MW basis. The bifacial rear gain at 1.5 m height adds the equivalent of a free 7–20% system capacity boost with zero additional hardware investment.
3. SHARK 625 Wp N-Type TOPCon G12R Dual Glass Bifacial Solar Panel
The SHARK 625 Wp N-Type TOPCon is a next-generation high-performance panel built for maximum output across homes, commercial buildings, industrial rooftops, and utility-scale systems. With 23.25% module efficiency, advanced half-cut Multi-Busbar (16BB) cell technology, and dual-glass bifacial construction, it delivers strong generation output even in India’s low-light monsoon mornings and harsh summer afternoons. Anti-LeTID and Anti-PID protection safeguard long-term yield, while the compact G12R form factor fits standard Indian residential and commercial mounting structures without modification.
625 Wp
Peak Power
23.25%
Module Efficiency
16BB
Multi-Busbar Cells
30 yrs
Performance Warranty
- N-Type TOPCon Bifacial: Rear-side generation captures reflected light from rooftop or ground surface — boosts daily and annual energy yield vs monofacial panels
- Electrical: Vmp 41.18 V / Imp 15.18 A | Voc 48.95 V | Isc 16.09 A | Power tolerance: 0–+2W | 132 cells (11×6)
- ARC Dual Glass: 2.0 mm ARC tempered front + 2.0 mm semi-ARC tempered back — anti-reflective coating on both sides maximises light transmission and extends module life
- Anti-LeTID & Anti-PID: Protects against the two most common degradation mechanisms in Indian field conditions — ensures long-term rated output is preserved
- Weather resistance: IEC 61215 tested | 5,400 Pa snow load | 2,400 Pa wind load | IP68 junction box | 3 bypass diodes | MC4 connector
- Dimensions & Weight: 2382 × 1134 × 30 mm | 33.0 kg | Anodised aluminium alloy frame
- Degradation: 1% year 1, <0.30% annually — retains over 91% rated output at year 25
- Warranty: 15-year product warranty + 30-year linear power performance warranty
Best for: Large 3–5 BHK homes, commercial office buildings, and industrial rooftops where higher output per module reduces total module count and installation complexity. The ARC dual-glass bifacial build also makes this the preferred choice for carport canopies and elevated ground-mount structures where maximum rear-side light capture is achievable.
4. SHARK 600 Wp HJT Dual-Glass Solar Panel
The SHARK 600 Wp HJT brings Heterojunction Technology into the residential and SME segment with a compact form factor designed for standard Indian rooftops. At 23.50% module efficiency and 600 Wp peak output, it uses 108 HJT cells in a 1960 × 1303 mm footprint — shorter than the 730 Wp variant — making it easier to configure on mid-sized terraces while still delivering premium generation performance. With up to 95% bifaciality, Anti-LeTID and Anti-PID protection, and an IP68-rated junction box, this is one of the most capable residential solar panels available direct-to-consumer in India today.
600 Wp
Peak Power
23.50%
Module Efficiency
95%
Bifaciality
30 yrs
Performance Warranty
- HJT Bifacial (95% bifaciality): Captures rear-side light with higher efficiency than standard bifacial PERC — maximum energy yield from both sides of the panel
- Electrical: Vmp 34.42 V / Imp 17.44 A | Voc 40.61 V | Isc 17.68 A | 18 busbars | 108 cells (2×54) | Power tolerance: 0–+5W
- Dual Glass: 2.0 mm high-tempered coated front + 2.0 mm semi-tempered back | IP68 junction box | 3 bypass diodes | 4.0 mm MC4 connectors
- Anti-LeTID & Anti-PID: Protects against micro-crack-related power loss and potential-induced degradation in hot, humid Indian conditions
- Weather resistance: IEC 61215 tested | 5,400 Pa snow | 2,400 Pa wind | 35 mm ice-ball impact | Anodised aluminium frame
- Dimensions & Weight: 1960 × 1303 × 35 mm | 32.3 kg — compact length allows denser layouts on non-standard Indian rooftops
- Degradation: 1% year 1, <0.30% annually — 91%+ rated output retained at year 25
- Warranty: 15-year product warranty + 30-year performance warranty
Best for: 3–5 BHK homes and small-to-medium businesses with 150–300 sq ft of available terrace space. The 1960 mm length is notably shorter than the SHARK 625 and 730 variants, making it the most practical HJT option for urban Indian rooftops with parapet walls, overhead water tanks, or irregular layouts.
5. Loom Solar Mono PERC Half-Cut SHARK 550 Wp Bifacial
The SHARK 550 Wp Bifacial brings proven Mono PERC Half-Cut technology with a bifacial dual-glass build — capturing sunlight from both sides to generate 30–50% more power than traditional single-face panels from the same physical footprint. At 21.40% module efficiency with 144 half-cut cells, the panel performs reliably even in cloudy and foggy conditions. The half-cut cell architecture reduces shadow-induced energy loss from 33% down to just 16.5% — a significant advantage on Indian rooftops where partial shading from water tanks, antennas, and adjacent parapet walls is an everyday reality.
550 Wp
Peak Power
21.40%
Module Efficiency
16.5%
Shadow Loss (half-cut)
25 yrs
Performance Warranty
- Bifacial Mono PERC Half-Cut: Captures sunlight from front and rear — generates 30–50% more energy per panel vs standard monofacial PERC of the same wattage
- Electrical: Vmp 42.50 V / Imp 12.95 A | Voc 49.70 V | Isc 13.75 A | 10 busbars | 144 cells (12×6)
- Double Glass: AR-coating toughened 2+2 mm dual glass | Black/Silver anodised aluminium frame | Split Junction Box (IP68)
- Shade tolerance: Half-cut design cuts shadow energy loss from 33% to 16.5% — critical for urban Indian rooftops with obstructions
- Low-light performance: Maintains generation in overcast and foggy conditions — stable output during monsoon months and early morning hours
- Dimensions & Weight: 2278 × 1134 × 30 mm | 32 kg | MC4 IP68-compatible connector | 400 mm, 4 m² cable
- Compatible with: Both standalone (off-grid) and on-grid solar systems
- Warranty: 10-year manufacturing warranty + 25-year performance warranty
Best for: 2–3 BHK homes and small businesses with standard rooftop space (150–250 sq ft) where bifacial energy gains and shade tolerance are required at a more accessible price point than HJT or TOPCon. The most versatile entry into Loom Solar’s high-performance lineup — compatible with on-grid, off-grid, and hybrid setups.
👉 Swipe left to see full table
*SHARK 650 LBC uses back-contact design (monofacial by structure, but rear connections). All panels are BIS-certified, IEC 61215/61730 compliant. Visit Loom Solar store for current pricing and bulk order rates. Prices vary by quantity and current promotions.
Cumulative Electricity Savings Over 25 Years (in ₹ Lakhs) — Loom Solar Systems
A 5 kW system pays for itself in ~3.7 years and generates over ₹24 lakh in electricity savings over its 25-year lifespan. Based on average Indian residential tariffs.
The Direct Purchase Advantage
When you buy solar panels through a dealer or EPC installer, 15–25% of your total bill goes to the distribution chain — not your panels. On a ₹3 lakh system, that is ₹45,000–₹75,000 that you are paying for logistics and margins, not solar hardware. Buying direct from Loom Solar’s official store means that money stays with you — before the PM Surya Ghar subsidy even applies.
Solar Panel Prices in India 2026: What Does a Complete System Actually Cost?
A fully installed residential on-grid solar system in India now costs ₹55–₹85 per watt, including panels, inverter, mounting structure, wiring, and installation. Here is what that translates to for complete system sizes — and what you pay after the PM Surya Ghar subsidy reduces your upfront cost.
👉 Swipe left to see full table
Source: Spectra Solar Power, Kondaas, 2025–26. Actual figures depend on your state tariff, roof type, and system configuration.
Do not want to pay the full upfront amount? Solar on EMI from Loom Solar starts at ₹4,500/month — financed through leading banks and NBFCs. That is roughly what most 2-BHK households in Tier 1 cities already pay in electricity. Your EMI replaces your electricity bill while building an asset that generates free power for 25 years.
Calculate Your Exact Savings — Free Calculator →
Why 1,00,000+ Indian Homes Choose Loom Solar
Loom Solar is not just another solar brand. In 8 years, it has become India’s most trusted direct solar manufacturer — the only solar company that sells panels to customers without a distributor in the middle. That means lower prices, direct accountability, and a relationship that does not end at the invoice.
1,00,000+
homes powered across India
10,000+
dealer network pan-India
ISO 9001
certified quality management
- Government recognised company — Startup India, DPIIT recognised
- Trusted by L&T, WHO, Escorts — India’s biggest institutions buy the same panels you can order today
- ET, BBC, ZeeBiz, The Hindu BusinessLine coverage — independently verified as India’s #1 solar brand
The Engineer Visit Advantage
For ₹1,000 (refunded on order), a trained solar engineer visits your home, measures your roof, analyses your electricity bill, and designs a system that is right for you — not a generic package. You know exactly what you are getting before you spend a rupee on hardware. No other solar brand in India offers this at scale.
Solar on EMI: Your Monthly Bill Becomes Your Asset
Your electricity bill is ₹5,000/month. Your solar EMI is ₹4,500/month. The difference: one of those payments builds an asset that works for you for 25 years. The other disappears the moment you pay it. Solar on EMI from Loom Solar through leading bank partners makes the switch with zero upfront compromise.
Stop paying for electricity you do not own.
Book a free home engineer visit and get your personalised savings report — before you commit to anything.
Frequently Asked Questions About Solar Panels in India
The Loom Solar Shark 600W N-Type TOPCon Bifacial is the best solar panel in India in 2026 for both residential and commercial use. It delivers 23.23% module efficiency with a 25-year performance warranty, BIS certification, and manufacturer-direct pricing from ₹18/W. For medium rooftops, the Shark 550W TOPCon Bifacial offers the same technology in a more compact form. For budget-conscious buyers, the Shark 440W Mono PERC Half-Cut provides 20.8% efficiency at an accessible price point. All Loom Solar panels are available for direct purchase online without dealer markup.
A 5 kW rooftop solar system in India reduces your electricity bill by 70–90%, saving approximately ₹4,800–₹6,000 per month or ₹60,000–₹66,000 per year (Arka360, 2025). Over a 25-year panel life, a 3 kW system generates over ₹9 lakh in total electricity savings. Actual savings depend on your current electricity tariff, how much you consume, and the direction your roof faces. Use Loom Solar’s free savings calculator to get your personalised number.
Under the PM Surya Ghar Muft Bijli Yojana, eligible homeowners receive up to ₹78,000 subsidy for a 3 kW system. The formula: ₹30,000/kW for the first 2 kW plus ₹18,000/kW for the 3rd kW. As of March 2026, over 26.21 lakh households have received this subsidy directly in their bank accounts (PIB, Government of India, 2026). Loom Solar’s team provides complete support through the application process. Apply at pmsuryaghar.gov.in.
Most residential solar systems in India pay for themselves in 2.5–4.2 years depending on system size and state electricity tariff. A 3 kW Loom Solar system with the PM Surya Ghar subsidy costs approximately ₹1,07,000 out of pocket and saves ₹3,300/month — giving a payback of just 2.7 years. A 5 kW on-grid system returns its investment in about 3.7 years (Spectra Solar Power, 2025). After payback, your 25-year performance warranty means you get 18+ years of near-free electricity.
Yes. Loom Solar offers solar on EMI starting at ₹4,500/month — financed through leading Indian banks and NBFCs. This is roughly equivalent to what most households in Indian metros already pay on their electricity bill. Zero-down-payment options are available for eligible buyers. Your monthly EMI effectively replaces your electricity bill while building a 25-year energy asset.
Quality solar panels in India carry a 25-year performance warranty — guaranteed to produce at least 80% of their rated power at year 25. The Loom Solar Shark series uses N-type TOPCon cells, IP68-rated dual tempered glass, and heat-optimised architecture that performs better than P-type PERC panels in India’s high-temperature, high-dust conditions. With an annual degradation rate of less than 0.4%, Loom Solar’s TOPCon panels retain over 90% output at year 25. Properly installed panels in India routinely last 30+ years.
On-grid solar connects to the electricity grid. Your panels power your home first; excess electricity is exported and credited to your bill (net metering). No battery needed. Eligible for PM Surya Ghar subsidy. Best payback. Off-grid solar operates independently with batteries — ideal for farms and remote locations without reliable grid access. Hybrid systems combine both: grid-connected with a battery backup for power cuts. Loom Solar’s CAML Lithium Battery is designed for hybrid setups.
For a typical 2 BHK home consuming 200–400 units per month, a 2–3 kW solar system is ideal. If you have adequate roof space (18–24 sq m), the Shark 440W Mono PERC gives you the best value — 7 panels for a 3 kW system. If your terrace is compact, the Shark 550W TOPCon Bifacial generates the same output from fewer panels, requiring less roof area. Both options qualify for the full ₹78,000 PM Surya Ghar subsidy.
Loom Solar panel prices range from ₹18 to ₹28 per watt depending on the model and technology. The flagship Shark 600W TOPCon Bifacial starts at ₹18/W, the Shark 550W TOPCon at ₹19/W, the Shark 545W Bifacial PERC at ₹20/W, the Shark 440W Mono PERC at ₹22/W, and the Shark 400W at ₹24/W. All prices are manufacturer-direct with no dealer markup. Check the latest solar panel price list for current pricing.
The Bottom Line: Which Solar Panel Should You Buy in India in 2026?
Here is the simple answer: for the best combination of performance, price, and purchase experience, the Loom Solar Shark series is the smartest buy for Indian homes and businesses in 2026. Whether you choose the flagship 600W TOPCon Bifacial (23.23% efficiency, from ₹18/W), the versatile 550W TOPCon, the value-oriented 545W Bifacial, or the budget-friendly 400W PERC — every Loom Solar panel comes with manufacturer-direct pricing, a 25-year warranty, and an engineer who visits your roof before you commit to anything.
Every month you do not switch is another month’s electricity bill that could have been your last. A 3 kW solar system saves you ₹3,300 every month. Over 25 years, that is more than ₹9.9 lakh in electricity savings — from a system that costs you roughly ₹1,07,000 after the PM Surya Ghar subsidy.
India has crossed 150 GW of solar. Millions of homes are already saving. The panels are proven, the subsidy is live, and the EMI makes it affordable right now.
Your next step takes 2 minutes:
Book a Home Engineer Visit
Trained engineer visits your roof, calculates needs, handles PM Surya Ghar paperwork. ₹1,000, refunded on order.
Calculate Your Savings
Enter your monthly electricity bill and see exactly how much solar will save you.
Shop Solar Panels Directly
Manufacturer pricing, pan-India delivery, full BIS-certified warranty.
WhatsApp Us for a Quote
Get a personalised system recommendation within 2 hours.
8 years. 1,00,000+ homes. ISO 9001-2015 certified. Govt. recognised. India’s No.1 Solar Company.
About the Author
